Home / Tips / Here's How to Clean Your Lulerain With Club Soda
Here's How to Clean Your Lulerain With Club Soda

Here's How to Clean Your Lulerain With Club Soda

Do you feel like your Lulerain Nanorain isn't working as well? It's possible that the filter might be clogged. The nano misters use nano-technology to break down water particles so that they're small enough to be absorbed by the skin. 

The filter used in the device is super fine, meaning it gets clogged easily. Usually rinsing it out with clean water will do the trick, but not always. 

Luckily, club soda will!

Club soda is one of the greatest cleaning hacks out there. Ever spill red wine only for club soda to magically get rid of the stain? The carbonation in it bubbles the stain out. It does something similar in the facial mister. The carbonation bubbles away whatever if clogging the filter, pushing it out so that it is clean. 

Here's how to clean your Lulerain Nanorain using club soda!

 

1. Empty the water chamber

2. Fill it with fresh club soda

3. Turn on the device. The regular fine mist might not come out and you may notice bubbling, which is fine!

4. After a minute or two, turn off the device and empty out the club soda

5. Rinse the water chamber with clean water

6. Refill it with clean water and start using!